Effectiveness of computer-based tyre modelling tools based on an embedded telemetry controller
Ivan Bolhov, Yaroslav KlyatchenkoThis study aimed to analyse key aspects of wheeled vehicle dynamics and to assess the effectiveness of modern computer modelling techniques in the vehicle design process. The research focused on the main parameters influencing tyre performance, including forces, moments, slip angle, vertical load, and their interrelations. The use of modelling was justified as a means of ensuring the required levels of grip, handling, and ride comfort during vehicle operation. Existing tyre models were classified into empirical, semi-empirical, and physical types, with a comparative analysis presented to highlight the advantages and limitations of each. Particular attention was given to the Magic Formula tyre model, which is widely used to characterise tyre behaviour. The study outlined the application of this formula in developing approximate mathematical models through curve-fitting methods, enabling accurate representation of tyre performance under various operating conditions. The research also examined current trends in tyre model development involving machine learning techniques, which facilitate parameter optimisation and improve modelling accuracy. It was demonstrated that the integrated use of machine learning and computer modelling methods can enhance tyre product development and support the creation of innovative solutions in the field of wheeled vehicles. The practical value of the research lies in the potential application of the proposed approaches to improve the dynamic characteristics of vehicles and other wheeled machinery, thereby reducing the need for costly field testing
References
[1] Bakker, E., Nyborg, L., & Pacejka, H.B. (1987). Tire modelling for use in vehicle dynamics studies. SAE Transactions, 96, 190-204.
[2] Beckman, B. (1991). The physics of racing: Part 1. Retrieved from http://autoxer.skiblack.com/phys_racing/contents.htm. [17] Rajamani, R. (2006). Vehicle dynamics and control (1st ed.). Heidelberg: Springer. https://doi.org/10.1007/0-38728823-6.
[3] Chandiramani, J.R., Bhandari, S., & Hariprasad, S.A. (2014). Vehicle data acquisition and telemetry. In Proceedings of the 2014 fifth international conference on signal and image processing (pp. 187-191). Bangalore: IEEE. doi: 10.1109/ ICSIP.2014.35.
[4] Gillespie, T.D. (1994). Fundamentals of vehicle dynamics. Warrendale: Society of Automotive Engineers.
[5] Gratton, S., Lawless, A., & Nichols, N. (2007). Approximate Gauss-Newton methods for nonlinear least squares problems. SIAM Journal on Optimization, 18(1), 106-132. doi: 10.1137/050624935.
[6] Hirschberg, W., Rill, G., & Weinfurter, H. (2007). Tire model TMeasy. Vehicle System Dynamics, 45(sup1), 101-119. doi: 10.1080/00423110701776284.
[7] Jabbar, M.A., Basheer, S., & Alshudukhi, J. (2024). EDT-STACK: An ensemble of decision tree-based stacking model for classifying tire tread status. Results in Engineering, 22, article number 102218. doi: 10.1016/j.rineng.2024.102218.
[8] Jacobson, B., et al. (2016). Vehicle dynamics compendium for course MMF062. Göteborg: Chalmers University of Technology.
[9] Karkaria, V., Chen, J., Luey, C., Siuta, C., Lim, D., Radulescu, R., & Chen, W. (2024). A digital twin framework utilizing machine learning for robust predictive maintenance: Enhancing tire health monitoring. ArXiv. doi: 10.48550/ arXiv.2408.06220.
[10] Karniadakis, G.E., Kevrekidis, I.G., Lu, L., Perdikaris, P., Wang, S., & Yang, L. (2021). Physics-informed machine learning. Nature Reviews Physics, 3, 422-440. doi: 10.1038/s42254-021-00314-5.
[11] Kemp, B., & Olivan, J. (2003). European data format “plus” (EDF+), an EDF alike standard format for the exchange of physiological data. Clinical Neurophysiology, 114(9), 1755-1761. doi: 10.1016/S1388-2457(03)00123-8.
[12] Lee, J.-H., Lee, J.-H., Yun, K.-S., Bae, H.B., Kim, S.Y., Jeong, J.-H., & Kim, J.-P. (2023). A Study on Wheel member condition recognition using machine learning (support vector machine). Sensors, 23(20), article number 8455. doi: 10.3390/s23208455.
[13] Lex, C. (2015). Estimation of the maximum coefficient of friction between tire and road based on vehicle state measurements. (Doctoral dissertation, Graz University of Technology, Graz, Austria).
[14] Li, J.-Y., Zhan, Z.-H., Li, Y., & Zhang, J. (2025). Multiple tasks for multiple objectives: A new multiobjective optimization method via multitask optimization. IEEE Transactions on Evolutionary Computation, 29(1), 172-186. doi: 10.1109/ TEVC.2023.3294307.
[15] Olazagoitia, J.L., Perez, J.A., & Badea, F. (2020). Identification of tire model parameters with artificial neural networks. Applied Sciences, 10(24), article number 9110. doi: 10.3390/app10249110.
[16] Pacejka, H.B. (2007). Tyre and vehicle dynamics (2nd ed.). Butterworth-Heinemann: Elsevier.
[17] Singh, K., Sarvari, P., Petry, F., & Khadraoui, D. (2019). Application of machine learning & deep learning techniques in the context of use cases relevant for the tire industry. In Reifen – Fahrwerk – Fahrbahn (pp. 241-268). Düsseldorf: VDI Verlag. doi: 10.51202/9783181023563-241.
[18] Song, H., Gao, L., Lu, Y., & Li, H. (2024). Application of selected machine learning methods for prediction of conicity in radial tire production. Applied Sciences, 14(15), article number 6393. doi: 10.3390/app14156393.
[19] Sousa, L.C., & Hultmann, V. (2022). Nonlinear tire model approximation using machine learning for efficient model predictive control. IEEE Access, 10, 107549-107562. doi: 10.1109/access.2022.3212420
[20] Stocco, D., Biral, F., & Bertolazzi, E. (2024). A physical tire model for real-time simulations. Mathematics and Computers in Simulation, 223, 654-676. doi: 10.1016/j.matcom.2024.04.020.
[21] Tuononen, A.J. (2008). Optical position detection to measure tyre carcass deflections. Vehicle System Dynamics, 46, 471-481. doi: 10.1080/00423110701485043.
[22] Tuononen, A.J. (2009). Vehicle lateral state estimation based on measured tyre forces. Sensors, 9(11), 8761-8775. doi: 10.3390/s91108761.
[23] Wang, J., Liu, Y., Ding, L., Li, J., Gao, H., & Sun, T. (2018). Neural network identification of a racing car tire model. Journal of Engineering, 2018, article number 4143794. doi: 10.1155/2018/4143794.
[24] Wheatstone, C. (1843). XIII. The Bakerian lecture. An account of several new instruments and processes for determining the constants of a voltaic circuit. Philosophical Transactions of the Royal Society of London, 133, 303-327. doi: 10.1098/rstl.1843.0014.
[25] Xu, N., Askari, H., Huang, Y., Zhou, J., & Khajepour, A. (2022). Tire force estimation in intelligent tires using machine learning. IEEE Transactions on Intelligent Transportation Systems, 23(4), 3565-3574. doi: 10.1109/TITS.2020.3038155.